TPC-W-PC-M/-E
CONTACT
DOWNLOAD TPC-W-PC-M/-E Data Sheet
SAMPLE ORDER
TPC-W-PC is a thixotropic thermally conductive phase changing compound optimising the thermal path e.g. between electronic packages and heat sinks. During warm-up the phase change compound starts filling up surface-specific roughnesses and unevenesses and expels any air enclosures from micro structures even at very low pressure. Both thin bondline and high thermal conductivity minimise the total thermal resistance. It can be pre-applied by screen printing. After drying the compound is dry-to-the-touch and ready for use on the thermal contact area.
TPC-W-PC-M and TPC-W-PC-E are printable compounds with alternatively long and extended dry times. TPC-W-PC-E dries only at elevated temperature.
PROPERTIES
- Optimal thermal contact by thin bondline
- Silicone-free
- Thermal conductivity: 3.5 W/mK
- Thixotropic
- Ideal alternative and replacement of messy thermal grease
- Accurate automated application by stencil printing for mass production
- TPC-W-PC-M: med dry time: @ RT or elevated temp.
- TPC-W-PC-E: extended dry time: only @ elevated temp.
AVAILABILITY
- TPC-W-PC-M and TPC-W-PC-E:
Printable type med dry -M and extended dry -E - -E dries at elevated temperature only
- 360 ml SEMCO cartridges (transparent)
- 30 ml syringes
APPLICATION EXAMPLES
Thermal link of
- MOSFETs and IGBTs
- Memory Modules
- IGBT Power Modules
- CPUs
For use in Servo drive control units / Computers / Automation appliances / Microelectronics
OVERVIEW
| Property | Unit | TPC-W-PC-M | TPC-W-PC-E |
|---|---|---|---|
| Material | Dryable Phase-Change Compound | Dryable Phase-Change Compound | |
| Colour | Grey | Grey | |
| Assembly | |||
| Specific Gravity dried Specific Gravity undried | g/cm³ g/cm³ | 1.8 @ RT 1.6 @ RT | 1.8 @ RT 1.7 @ RT |
| Viscosity dried @ 10 rpm Viscosity undried @ 10 rpm | Pas Pas | 60 @ 60°C / 42 @ 80°C / 25 @ 100°C / 18 @ 120°C 85 @ RT | 60 @ 60°C / 42 @ 80°C / 25 @ 100°C / 18 @ 120°C 96 @ RT |
| Storage (@ RT) | Months | 9 | 9 |
| RoHS Conformity | 2015/863/EU | Yes | Yes |
| Thermal | |||
| Resistances1 @ 150 PSI | °C-inch²/W | 0.007 | 0.007 |
| Resistances1 @ 30 PSI | °C-inch²/W | 0.013 | 0.013 |
| Resistance2 @ 10 PSI @ Thickness | °C-inch²/W | 0.017 | 0.017 |
| Thermal Conductivity | W/mK | 3.5 | 3.5 |
| Phase Change Temperature | °C | ca. 45 | ca. 45 |
| Operating Temperature Range | °C | < 110 | < 110 |
| Max. Storage Temperature | °C | 25 | 25 |
