SILIKON GAP-FILLER PAD TGF-HUS-SI
extremely soft, elastic
KONTAKT 
TGF-HUS-SI is an electrically insulating thermally conductive silicone gap filler. It is ideal for use in applications where thermal transfer over large gaps caused e.g. by big tolerances or different stack up heights must be achieved. Due to the specific formulation and filling with ceramic particles the silicone elastomer has a good thermal conductivity. Through its extreme softness and flexibility the material perfectly mates to irregular surfaces thus filling gaps at very low pressure. By its use the total thermal resistance is minimised. The natural tackiness of the material allows for an easy and reliable pre-assembly.
EIGENSCHAFTEN
- Extremely soft and compliable
- Thermal conductivity: 1.8 W/mK
- Operates at very low pressure
- Extraordinary chemical resistance and long- term stability
- Shock absorbing
- Easy mounting through self tackiness
- Two-side self-tacky
LIEFERFORMEN
- Sheet 300 x 400 mm
- Tacky on both sides (TGF-HUSXXXX-SI)
- Die cut parts
- Kiss cut parts on sheet
ANWENDUNGSBEISPIELE
Thermal link of:
- SMD packages
- Through-hole vias
- Capacitors
- Electronic parts to heat pipes
For use in Automotive applications / Laptops / Medicine engineering / Industrial PCs
AUF EINEN BLICK
| Eigenschaft | Einheit | TGF-BXS0500-SI | TGF-BXS1000-SI | TGF-BXS1500-SI | TGF-BXS2000-SI | TGF-BXS3000-SI |
|---|---|---|---|---|---|---|
| Material | Silikon mit Keramikfüllung | Silikon mit Keramikfüllung | Silikon mit Keramikfüllung | Silikon mit Keramikfüllung | Silikon mit Keramikfüllung | |
| Farbe | Dunkelgrau | Dunkelgrau | Dunkelgrau | Dunkelgrau | Dunkelgrau | |
| Dicke | mm | 0,5 ±0,10 | 1,0±0,15 | 2±0,20 | 3,0±0,25 | 3,0±0,30 |
| Härte | Shore 00 | 30 | 30 | 30 | 30 | 30 |
| Entflammbarkeit | UL 94 | V0 | V0 | V0 | V0 | V0 |
| RoHS Konformität | 2015 / 863 / EU | Ja | Ja | Ja | Ja | Ja |
| Thermisch | ||||||
| Widerstand1 @ 400 kPa @ Dicke | °C-inch²/W (mm) | 0,34 (0,31) | 0,56 (0,54) | 0,82 (0,85) | 1,10 (1,09) | 1,52 (1,54) |
| Widerstand1 @ 200 kPa @ Dicke | °C-inch²/W (mm) | 0,40 (0,36) | 0,69 (0,68) | 1,12 (1,16) | 1,53 (1,63) | 2,06 (2,13) |
| Widerstand1 @ 70 kPa @ Dicke | °C-inch²/W (mm) | 0,50 (0,46) | 0,85 (0,85) | 1,48 (1,57) | 2,10 (2,18) | 2,71 (2,92) |
| Thermische Leitfähigkeit | W/mK | 1,8 | 1,8 | 1,8 | 1,8 | 1,8 |
| Betriebstemperaturbereich | °C | - 40 bis + 150 | - 40 bis + 150 | - 40 bis + 150 | - 40 bis + 150 | - 40 bis + 150 |
| Elektrisch | ||||||
| Durchschlagsfestigkeit | kV / mm | > 10 | > 10 | > 10 | > 10 | > 10 |
| Durchgangswiderstand | Ohm - cm | 8,056 x 1012 | 8,056 x 1012 | 8,056 x 1012 | 8,056 x 1012 | 8,056 x 1012 |
| Dielektrizitätskonstante | @ 1 MHz | 5,6 | 5,6 | 5,6 | 5,6 | 5,6 |
DO YOU HAVE ANY QUESTIONS?
/ Contact
+49 (0)89 665 477-83
+49 (0)89 665 477-83
